C5/C6 Corvette Parts & Accessories - Air Intake & Induction

C5 & C6 Stage 1 Standard Fender/Firewall Mount Water Methanal Injection KIT

$219.99

Designed specifically for those who want to use their existing windshield wiper fluid container or already have their own tank this kit. This kit does not include a tank.

System Contents Include:

• 250 psi pump with EPDM seals for 100% methanol or alcohol
• Adjustable boost activated switch from 1-25 psi
• Check valve with quick disconnects
• Universal quick connect tank fitting
• 20 ft of black high pressure tubing
• 5 ft of vacuum tubing
• 25 ft of electrical wire
• Nickel plated injector
• Nozzle sized to application
• Greene LED status light
• Fuse holder with fuse
• Hardware for securing pump

Engineered specifically for both carbureted and EFI forced induction applications. Our Stage 1 boost activated fender/firewall mount kit is as affordable as it gets. Once installed and hooked up, operation is very simple. Simply begin by adjusting the adjustable boost activated switch mounted on the pump to your desired boost activation point ranging from 1-25 psi. During driving conditions, the system will remain on stand by until the predetermined boost activation point is reached. Once activated the system will spray a flat continues amount of fluid through the nozzle or nozzles. The water alcohol injection system will remain on untill boost drops back down below the set activation point. System then remains on stand by ready to be activated again.

Lower Air Temps By 50-250+ Degrees & Increase Power 10-15% With ONLY Windshield Wiper Fluid!

That's right! Using nothing more then windshield wiper fluid you can quickly achieve the benefits of a water/methanol injection system. Best of all, it's very easy to locate just about anywhere in the states and cost only $2.00-$3.00 per gallon. But not just any windshield wiper fluid will do. You'll need to buy the windshield wiper fluid that is rated for negative 20 degrees or greater below zero. It is only this windshield wiper fluid, which contains a 50% content or greater of methanol. Using strictly windshield wiper fluid you can expect to see a 50-250+ degree drop in air intake charge temperatures on supercharged and turbocharged engines with horsepower gains ranging from 10-15% are common. (temperature drops and horsepower gains vary depending on engine build, type supercharger or turbocharger used, amount of boost and intercooled or non-intercooled)

110+ Plus Octane With ONLY Wind Shield Wiper Fluid!

Thats right! Using nothing more then windshield wiper fluid as listed above you can effectively increase your 91-93 octane pump gas by 10-20+ points dramatically increasing your fuels octane rating well over 100+ octane. No need for expensive racing fuels which can cost as much as $16.00 per gallon at some race tracks. Windshield wiper fluid cost's only $2.00-$3.00 per gallon. Even better our 1.5 gallon trunk mount container will last up to 2-3 weeks before needing to be refilled on a typical 500-600 horsepower supercharged or turbocharged motor costing you only pennies more per gallon to have 100+ octane.

Water Alcohol/Methanol Injection = Cheap Insurance For Your Motor

You wouldn't drive your car with out car insurance. Now theres insurance for your motor. Protect your motor and the investment you have in your motor with proven lower air intake charge temperatures by 50-250+ degrees and increased octane by 10-20+ points. Together this will reduce and help eliminate engine damaging detonation. It's cheap insurance for your motor.

Benefits Of Water Alcohol/Methanol Injection:

• Lower air temperatures by 50-250+ degrees
• Reduces cylinder temperatures up to 300+ degrees
• Increase your 87-93 pump gas by 8-20+ points
• Increase horsepower safely by 10-15%
• Allows you to safely run more boost and timing
• Longer more stable combustion expansion and progression
• Removes carbon build up from combustion chambers, pistons and valves
• Reduces & helps eliminate engine damaging detonation & pre-ignition
• No need for expensive racing fuel or additives

Features vs. Leading Competitors:

• Compatible with 100% alcohol, methanol or ethanol
• Nickel plated injector nozzle holder
• Check valve pre-installed for quicker installation
• Lightning fast response via boost signal
• Pre-wired - simply ground it and hook up power